My Sunrise

    • Photo Motion Detector

    Function overview

    • The Photo Motion Detector is a passive infrared (PIR) motion-sensor camera that sends wireless detection signals and images when movement is detected.

    • Detection range: up to 12 m when mounted at 2.3 – 2.5 m

    • With pet immunity enabled, it ignores pets of up to 25 kg.

    • LED indicator

      • Blue LED ON for 1.5 seconds: Movement is detected and battery is low

      • Slow flash: 30-second warm-up period

      • Continuous flash: Sending images due to a fault (e.g., low battery)

      • Double flash: acknowledgement from Base Station

    • Image capture

      • When armed, sensor captures three alarm images (320 × 184 px) per movement detected.

      • Complex environments with intense light/colours may result in larger file sizes and truncated transmissions.

    • Warm-up period

      When the alarm system is switched to Active mode the Photo Motion Detector will warm up for 30 seconds. During this time, the detector sensor is inactive.

    • Battery

      • Uses 2× 1.5 V “AA” alkaline batteries

      • Low battery → app message + optional push notification, call, SMS, email and the blue LED lights up for 1.5 seconds when motion is detected.

      • Battery replacement:

        • Remove old batteries, wait 10 miuntes then press Function button twice to discharge.

        • Insert new batteries.

        • Plus pole must face upwards.

    • Supervision

      • The Photo Motion Detector regularly sends a self-test signal.

      • If signal not received → “Accessory Failure” in app + optional push notification

    • Pet immunity (JP3)

      • ON = Pet immunity disabled

      • OFF (default) = Pet immunity enabled (ignores pets of up to 25 kg)

    • Sensitivity adjustment (Jumper JP4)

      • ON (default) = increased sensitivity

      • OFF = normal sensitivity

    Installation
    1
    Switch on

    Remove the battery isolation strip to switch on the detector.

    2
    Registering with the app

    Follow the instructions in the app to add the Photo Motion Detector.


    3
    Alternatively: Add the Photo Motion Detector manually

    1. Put base station in pairing mode (press Reset/Learn for six seconds until LED flashes blue).

    2. Press and hold LED indicator on detector for three seconds (LED lights up).

    3. Success = one beep from base station. If the detector has not been added within 25 seconds, please repeat the pairing process. 

    NOT AVAILABLE

    Tip:

    Give each detector a unique name for easy identification.

    4
    Placing/mounting the Photo Motion Detector

    • Mount on flat wall or in corner → widest coverage

    • Keep field of view clear (no curtains, furniture, etc.)

    • Recommended mounting height: 2.3–2.5 m

    • Higher mounting = larger pet-immune zone, but bigger blind spot below

    • Choose a location to which animals cannot climb

    • Do not aim the device at staircases

    • The objective is that intruders should move sideways across the field of view.

    • Mounting:

      • With screws and wall plugs

      • Alterntively, with double-sided adhesive pads (included)

    NOT AVAILABLE

    Limitations

    • Not for outdoor use

    • Avoid having large obstacles in detection area

    • Avoid direct sunlight

    • Avoid damp or condensatiuon-prone areas

    • Avoid moving objects (e.g., curtains)

    • Avoid reflective surfaces (e.g., mirrors, windows)

    • Do not install near AC/heaters

    • Avoid reflected IR signals (may cause false alarms)

    5
    Testing the Photo Motion Detector

    Test the detector by walking past it. Check whether you receive a notification on your mobile phone, then view the live image in the Home Security app.

    Congratulations! The installation of your Photo Motion Detector is complete.

    Setting from device

    Sensitivity / Pet immunity (by internal Jumper setting)

    Button functions

    Test button, Learn button

    Pet immunity

    Up to 25 kilograms

    Sleep timer

    1 minute, extendable up to 3 minutes maximum

    PIR Motion sensor

    Range 12 metres

    Horizontal angle

    90°

    Vertical angle

    52°

    Installation height

    2.4 Meter

    Camera lens

    HD CMOS Camera

    Field of view

    (H) 106°

    Resolution

    320 x 240 pixels (1280 x 720, 640 x 480 pixels)

    Night illumination

    Warm white fill light covering 10 metres

    Power source

    1.5 V, AA Alkaline battery x 2

    Battery life

    3 years (Actual battery life may vary depending on settings, environment, and usage)

    Low battery threshold

    2.35 V

    RF frequency

    868 MHz

    Wireless range

    300 metres in open space

    Operating temperature

    −10 °C to 45 °C (14 °F to 113 °F)

    Operating humidity

    Up to 85% non-condensing @ 23 °C

    Dimensions

    95 × 95 × 49.1 mm

    Weight

    125.5 g (battery excluded)