My Sunrise

    • Base Station

    Key functions

    • Central Hub: The Base Station acts as the central control unit in your home, connecting all Home Security sensors and accessories (such as the Keypad and Key Fob) to the cloud-based Home Security alarm system.

    • Mobile backup connection: If your fixed Internet connection fails, the built-in mobile connection is automatically activated – ensuring your alarm system always remains online.

      Note: The cameras and the Video Doorbell are connected to the Home Security cloud system directly via Wi-Fi, independently of the Base Station.

    Power supply and battery

    • AC Power: Connect the Base Station to a wall outlet using the AC power adapter provided in your starter set. Only ever use the included adapter.

    • Rechargeable Backup Battery: A built-in rechargeable battery ensures operation during power outages for approximately 6–8 hours.

      • During normal operation, the battery is charged automatically.

      • The battery status is shown in the app under «Base Station».

      • A full charge takes around 32 hours.

    Installation
    1
    Registering with the app

    Follow the step-by-step instructions in the app to add accessories such as the Base Station, sensors, Smart Plugs, Key Fobs, or Keypads.

    2
    Alternatively: Add the Base Station manually

    1. Activate pairing mode

      Press and hold the Reset/Learn button on the back of the base station for 6 seconds until the LED flashes blue.

    2. Pair the accessory

      Press the pairing button on the accessory. The LED on the accessory will light up.

    3. Successful connection

      A single beep from the base station confirms that the accessory has has been paired successfully.

    3
    Placing/mounting the Base Station

    Once the Base Station has been successfully paired and is working reliably in the desired location, you can mount it.

    Congratulations! The installation of your Base Station is complete.

    Number of zones

    160 wireless zones

    Control facilities

    Remote keypad & remote controller & app

    Alarm transmission path

    Built-in module: RJ45 port (IP connection) + LTE + RF

    Report destinations

    Egardia Atlas service

    Arming modes

    Active, At Home, Inactive

    Alarm type

    Burglary, Panic, Fire, (Medical, Water, Silent)

    Supervision

    Inactivity alert after 6 hours

    External AC adaptor

    Input: AC 100-240 V, 50/60 Hz ¦ Output: DC 12 V 1 A

    Back-up battery

    Ni-MH 7.2 V, 600 mAh rechargeable battery pack

    Battery recharge time

    32 hours

    Battery back-up time

    6-8 hours (actual battery life may vary depending on settings, the environment and usage)

    Cut-off voltage

    6 V ± 0.2 V

    Current drain

    AC power (standby): Max. 150 mA @ 12 V (w/o battery)

    Battery power (suspend): Max. 70 mA @ 7.5 V

    RF frequency

    868 MHz

    LTE frequencies

    B1 (2100 MHz) / B3 (1800 MHz) / B5 (850 MHz) / B7 (2600 MHz) / B8 (900 MHz) / B20 (800 MHz)

    3G frequencies

    B1 (2100 MHz) / B5 (850 MHz) / B8 (900 MHz)

    Operating temperature

    –10 °C to +45 °C

    Operating humidity

    85% relative humidity @ 23°C (non-condensing)

    Dimensions

    129 x 129 x 45 mm

    Weight

    331.5 g (includes back-up battery)